[GEORGIOS_XYNOS]

Σαββα χρωσταω κατι, αργω το ξερω

"its easy , I stripped the guts out of the 2T dizzy, got a machine shop to make a plug to go into the top approx 10cm tall and made it a very tight fit, then make a hole for the shank of the 20V Dizzy to fit into tight, using the original 2t shaft cut the top plate off where the mechanical advance was,so i was left with a shaft just comming out of the lower body on the dizzy, attacked the 20v dizzy shaft with a grinder and made a T , cut a slot in the 2t shaft and they all mate together when put together. like the dizzy to oil pump slot/T drive.

I dont know how well i explaned that. but im sure you can work it out from what i have said.

for people that ask me how i made up the dizzy. Here is a really crappy pic i made giving a basic look at how it all goes together."